Table of Contents
Advertisement
EXTERIOR LIGHTING AND SIGNALS
2
1
4
Switching on the dipped
beam headlights
Manual operation
Turn the end of stalk 1 until the
symbol is opposite mark 2.
In all cases, an indicator light on the
instrument panel comes on.
(continued)
Automatic operation (depending
on vehicle)
With the engine running, the
dipped
beam
headlights
switched on or off automatically
depending on the level of ambient
light, without the need to operate
stalk 1 (position 0).
This function can be deactivated or
reactivated.
- To activate it with the ignition on,
press button 4 for at least four
seconds. An instrument panel
message confirms this action.
- To deactivate it, with the ignition
on and the vehicle stationary,
press button 4 for at least four
seconds. The "Auto lights OFF"
message is displayed on the
instrument panel.
If stalk 1 is operated, it overrides
and cancels the automatic function
temporarily.
See-me-home lighting function
This function (useful, for example,
for opening a gate, a garage, etc.)
are
enables you briefly to light up the
dipped headlights.
With the ignition switched off and
the headlights off, pull stalk 1
towards you: the dipped beam
headlights
come
approximately thirty seconds.
This action may be carried out no
more
than
four
maximum lighting period of two
minutes.
To switch off the lights before they
go out automatically, turn the end of
stalk 1, then return it to position 0.
on
for
times
for
a
1.91
Hide quick links:
Advertisement
Table of Contents
