Parking Proximity Sensor - Renault 2005 Megane Owner's Manual

PARKING PROXIMITY SENSOR

Operating principle
Ultrasonic sensors located in the
rear bumper measure the distance
between the vehicle and an obstacle
when reversing.
This measurement is indicated by
beeps which become more frequent
the closer you are to the obstacle,
until they become one continuous
beep when the
approximately
25 centimetres from the vehicle.
Note: make sure that the ultrasonic
sensors are not blocked (dirt, mud,
snow, etc.).
2.32
obstacle is
Operating faults
When
operating fault there will be a 5
second continuous beep as a warning
when
Contact your RENAULT Dealer.
the system detects
reverse gear is selected.
This function
additional aid that indicates
the distance between the
vehicle and an obstacle
whilst reversing,
signals.
Under no circumstances should it
replace the driver's
responsibility whilst reversing.
an
The driver should always pay
attention to sudden
during driving: always ensure that
there are no moving obstacles (such
as a child, animal, pram or bicycle,
etc.) or small, narrow objects such
as stones or posts in your path
when manoeuvring.
is an
using sound
care or
incidents