Setting Up The Alphatrak 3 Meter; Set Sound Volume - Zoetis AlphaTrak 3 User Manual

Caution: Read all the instructions provided in this user guide and practice the testing procedures before using the AlphaTrak 3 meter. Blood glucose monitoring
should be done with the guidance of a veterinarian/veterinary surgeon.

Setting Up the AlphaTrak 3 Meter

The purpose of this section is to set the meter sound volume, time, date, units and Bluetooth connection.

Set Sound Volume

If you prefer:
1. With the meter off (no test strip inserted), press and hold m for 3 seconds until SET appears.
2. Press m to bypass setting the optional reminder alarms. You may choose to set these later (see Setting
Reminder Alarms section).
Note: With the sound volume on, the meter will
beep when:
• The test strip is full of blood
• The test result appears on the display
• An error occurs
You may also choose to silence the meter
3. Set sound volume:
Press c until you see Then:
6