Table of Contents
Advertisement
If the test does not start after applying blood drop, go to Troubleshooting section.
9. View result:
The result appears on the display when the test is complete.
10. Turn on Bluetooth:
Note: If your Bluetooth mode is set to turn on automatically, you will see a flashing Bluetooth
icon once the result is ready. This indicates that Bluetooth is activated and ready to pair with
mobile the application.
If it is not set to turn on automatically, but you would like to transmit the result to your
AlphaTrak 3 Application press m and then c in 3 sec to turn on Bluetooth.
Note: Once meter and Application are paired correctly, the Bluetooth icon will stop flashing. The
connection has been established.
Note: you will see 2 flashing arrows while the result is being transmitted.
11. Remove test strip to turn meter off.
17
Hide quick links:
Advertisement
Table of Contents
