Table of Contents
Advertisement
Maintenance instructions
The OXY-THERM
between gas and oil firing. Customer-specific procedures for shut down and blocking of fuel gas and
oxygen supply to the burner must be developed and adhered to prior to attempting removal and changing
of fuel inserts. Only trained and qualified service and maintenance personnel should perform this
operation.
Safety requirements
Regular inspection, testing and recalibration of combustion equipment according to the installation manual is an integral part of its
safety. Inspection activities and frequencies shall be carried out as specified in the installation manual.
Perform the following activities at least annually as part of a recommended preventative maintenance routine:
Inspect burner internal parts for wear and oxidation.
Inspect associated control instruments and devices for function with particular attention to all safety permissive switches.
Perform leak tests on fuel shut-off valves according to any schedule established by the authority having jurisdiction.
Visual inspections
Regular visual inspection of all connections (air and fuel piping to the burner, bolting of the burner to the block) and burner flame
size and aspect are essential.
Recommended spare parts
Keep local stock of operationally critical parts. Contact MAXON for a complete list of recommended spare parts for your specific
application.
w w w . m a x o n c o r p . c o m
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
®
FHR burner is provided with quick release clamps to allow for rapid change-over
Dual fuel burners - OXY-THERM
3 - 18.4 - 17
®
FHR
E -
i
- 5/13
Advertisement
Table of Contents
