Table of Contents
Advertisement
16
4
Close the transfer guide (rear) and turn the fixed screw in the opposite direction
to the arrow to tighten it.
Firmly tighten the fixed screw.
• When the leading edge of the paper has already been fed as far as the
fixing assembly, always remove the paper from the rear door side. (→ [③
When the paper has been fed as far as the fixing assembly] p. 18)
• Toner from the part that has been transferred has not been fixed on the
paper yet. If you touch this part of the paper you will get toner on your hand.
Take hold of a part of the paper that has not been transferred to pull out the
paper so that you do not get toner on your hands.
• If you get toner on your hands or clothing wash it off with water
immediately.
• After you have removed the paper, return the transfer guide to its original
position before you load the toner cartridge.
Advertisement
Table of Contents
