Table of Contents
Advertisement
12
6
Attach the cassette cover and insert the paper cassette into the printer.
Insert it slowly until its front surface is flush with the front surface of the printer.
• Make sure you correctly attach the cassette cover to the paper cassette.
When an optional duplex unit is attached to the printer, you cannot duplex
print if the cassette cover has not been attached to the paper cassette, is
loose or has slipped.
• Always check that the loaded paper size is the same as that shown on the
paper size indicator before inserting the paper cassette into the printer. If
the indicated size is different, this could cause a malfunction.
• If the paper overlaps when it is sent through, turn the paper around (the end
that comes into contact with the rubber pad at the front of the paper
cassette) in the paper cassette and reload the cassette.
Advertisement
Table of Contents
