Advertisement
6. Hardware Installation
6.1 Before you Begin
The M81-X series motherboard is designed to fit into a standard ATX form factor chassis.
The pattern of the mounting holes and the position of back panel I/O ports meet the ATX
motherboard specification. The chassis may come with various mounting fasteners which
are made of metal or plastic. It is highly recommended to use as many metal fasteners as
possible to mount the motherboard in the chassis for better grounding.
6.2 Caution Static Electricity
Before removing the motherboard from its anti-static bag, you need to eliminate any static
electricity that may be accumulated on your body by touching a grounded or anti-static
surface. If noting is available, touch the housing of power supply which is plugged into the
AC outlet.
After removing the motherboard from its anti-static bag, place it only on a grounded or anti-
static surface, component side up. Inspect the motherboard and contact you retailer
immediately if it is damaged.
6.3 Installation Guide
We will now begin the installation of motherboard. Please follow the procedure step-by-
step which designed to guide you to a complete and correct installation.
Step1: Install the PPGA370 Processor (If you are install PPGA370 Processor, please
refer to it for your require)
Locate the Pin-1 on the Processor and PGA370 socket, then open the locking
lever for Processor
Orient the Processor and insert vertically on to the socket until the Processor
clip into place.
6. Hardware Installation
M81-X Series User's Manual
Alignment Edge
21
Advertisement
