Editing Text; Entering Letters And Characters - Aastra VENTURE User Manual

All manuals and user guides at all-guides.com

Editing text

When you need to edit onscreen display text, (for example, to enter
a directory list name), use the following guidelines:
To
enter text at the current
cursor position.
move the cursor to the left
without deleting.
move the cursor to the right
without deleting.
add a space at the
end of a line.
move the cursor to the left
and delete.
change the case of a character. Press the

Entering Letters and Characters

You can enter characters using the telephone's dial pad. To enter a letter,
press the key with that letter on it. If the letter is the second one on that key,
press the key twice. For example, to enter 'R', press 7 three times. The cursor
will advance to the next space after a delay of 2 seconds or if you press a
different key.
To change the case of a letter, press the ChangeCase softkey, and then enter
the letter. By default the first letter of a word or name will be capitalized, and
the letters following will be lower case.
Special characters are entered by pressing the 1 and the # keys.
Characters will appear in this order:
1: & , ( ) ` . _ - 1. #: # / \ @.
Do this
Press the dialpad key with the corresponding
letter on it. Press once for the first letter, twice
for the second, and three times for the third.
For example, to type "
R
key three times.
Press the 3 key.
Press the 4 key.
Press the 4 key.
Press the softkey.
backspace
ChangeCase
Note: The first character in a line, and the first
character after a space are automatically
capitalized.
Model VentureIP 480i User Guide 10
", press the dialpad
softkey.