Weider 150 TC User Manual page 7

3. Attach the other Stabilizer (4) to the Rear Leg
(3) with two M10 x 63mm Carriage Bolts (18)
and two M10 Locknuts (19). Do not tighten the
Locknuts yet.
Attach the Rear Leg (3) to the Frame (1) with
two M10 x 20mm Bolts (25) and two M10
Washers (20).
See steps 1–3. Tighten the M10 Locknuts (19).
4. Insert a Pad Tube (10) into the Front Leg (2).
Wet the ends of the Pad Tube with soapy
water, and slide a Foam Pad (9) onto each end
of the Pad Tube.
Repeat this step with the other Pad Tube
(10).
5. Attach the Pivot Bracket (6) to the Backrest
Frame (5) with two M10 x 70mm Bolts (26) and
two M10 Locknuts (19). Do not tighten the
Locknuts yet.
Insert the Pivot Bracket (6) into the slot in the
Frame (1).
All manuals and user guides at all-guides.com
7
3
4
18
3
19
4
9
5
5
26
1
19
1
20
25
9
2
10
10
19
6
Slot