Page 2
PRODUCT FEATURES GETTING STARTED Blast your favorite tunes, talk over the intercom Update this product for free with the latest with your buddies, hear directions from your firmware to fully enjoy the new advanced GPS and more, all through your A10 Bluetooth features built into this product.
TABLE OF CONTENTS BEFORE STARTING GETTING STARTED Package Contents Button 1.1.1 Wired Boom Microphone Type LCD Display 1.1.2 Wired Microphone Type Charging the Headset Powering On and Off INSTALLING THE HEADSET ON Adjusting the Volume YOUR HELMET Downloadable Parani Software Using the Clamp 3.6.1 Parani Device Manager Using the Glued Surface Mounting...
Page 4
MOBILE PHONE USAGE GENERAL SETTINGS Using Phone Functions Function Priority Speed Dialing Configuration Menu 5.2.1 Assigning Speed Dial Presets 8.2.1 Assigning Speed Dial 5.2.2 Using Speed Dial Presets 8.2.2 Voice Prompt (Default: Enable) 8.2.3 Delete All Pairings Firmware Upgrades STEREO MUSIC TROUBLESHOOTING BLUETOOTH INTERCOM Fault Reset...
1.1.2 Wired Microphone Type • Speakers and Wired Microphone • Headset Main Unit Multi-function Button (+) Button (-) Button Wired Microphone • Clamp • Glued Surface Mounting Adapter Speakers and • Speaker Sponge (2) Microphone Port LCD Display • Hook and Loop Fasteners for Speakers (2) DC Power Charging &...
2.2 Using the Glued Surface 2 INSTALLING THE HEADSET ON Mounting Adapter YOUR HELMET 1. Insert the main module into the glued surface mounting adapter using the two connecting slots on the back. Before installing the headset, you need to choose between the clamp and the glued surface mounting adapter.
2.3 Installing the Speakers 4. Insert the Speakers and Microphone plug into the headset. 2.3.1 Wired Boom Microphone Type If you want to install speakers into the headset, follow the steps below: 1. Remove the cover of the adhesive sticker of the hook and loop fasteners for speakers.
2.3.2 Wired Microphone Type 4. Peel off the cover of the hook and loop fastener for wired microphone to expose the If you have a full face helmet, you can use the wired adhesive tape. Then, attach the hook and microphone.
6. Insert the Speakers and Microphone plug 3 GETTING STARTED into the headset. 3.1 Button Tap/ Press and Hold Multi-function Button (+) Button (-) Button...
• Any 3rd party USB charger can be used with The headset can be charged using many common Sena products if the charger is approved by methods via the supplied USB power & data cable. either the FCC, CE, IC or other locally approved Depending upon the charging method, the headset agencies that Sena accepts.
3.4 Powering On and Off 3.5 Adjusting the Volume You can raise or lower the volume by tapping the • To power on the headset, press and hold the (+) Button or the (-) Button. Volume is set and (+) Button and (-) Button for 1 second. maintained independently at different levels for each audio source (i.e., phone, intercom), even when the headset is rebooted.
4.1 Phone Pairing 4 PAIRING YOUR HEADSET There are three ways to pair the phone. WITH OTHER BLUETOOTH 4.1.1 Initially Pairing the A10 DEVICES The headset will automatically enter the phone pairing mode when you initially turn on the headset Before using the headset with other Bluetooth or in the following situations: devices for the first time, they will need to be...
1. While the headset is off, press and hold the (+) Button and (-) Button for 5 seconds. You will hear a voice prompt, “Phone pairing”. 2. On your smartphone, search for Parani A10. 3. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
“Phone pairing”. 2. Tap the (+) Button until you hear a voice prompt, “Second mobile phone pairing”. 2. On your smartphone, search for Parani A10. 3. Enter 0000 for the PIN. Some smartphones 3. On your smartphone, search for Parani A10.
5 MOBILE PHONE USAGE 5.1 Using Phone Functions Incoming Call Make a Call • Answering a call Tap the Multi-function Button. • Ending a call Tap the Multi-function Button. Make a Call with Conversation • Rejecting a call Voice Dialer Press and hold the Multi-function Button for 2 seconds.
5.2 Speed Dialing 2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear 5.2.1 Assigning Speed Dial Presets prompts for each menu item. 3. Tap the Multi-function Button to select a You need to assign speed dial numbers before voice menu among the followings: using the speed dial.
4. To redial the last number called, tap the 6 STEREO MUSIC Multi-function Button when you hear a voice prompt, “Last number redial”. 5. To call one of the speed dials, tap the Multi- • Play/Pause music function Button when you hear a voice Press and hold the Multi-function Button for prompt, “Speed Dial (#)”.
2. Tap the Multi-function Button on either 7 BLUETOOTH INTERCOM headset and wait until the intercom connection is automatically established. Intercom Pairing The headset can be paired with up to three other headsets Bluetooth intercom Parani conversation. 3. Repeat steps 1 and 2 to pair with Intercom Friends C &...
7.2 Two-way Intercom Last-Come, First-Served You can start/end an intercom conversation with one of any intercom friends by tapping the Multi- function Button. Intercom Friend 1 Intercom Intercom Friend 1 Friend 2 = Tap the Multi-function Button. Intercom Friend 1 Intercom Intercom Intercom...
7.3 Multi-Way Intercom 7.2.1 HD Intercom HD Intercom enhances the two-way intercom Multi-Way Intercom enables conference-call-style audio from normal quality to HD quality. When you conversations with up to three intercom friends at enter into a Multi-Way Intercom, HD Intercom will the same time.
7.3.1 Start a Three-Way Intercom 2. Start an intercom conversation with one of the two friends in your intercom group. For Conference example, you (A) may start an intercom You (A) can have a three-way conference intercom conversation with intercom friend (B). Or with two other intercom friends (B &...
7.3.2 Starting a Four-Way Intercom 3. The second intercom friend (C) may join the intercom by making an intercom call to Conference you (A). You can have four-way conference intercom with three other intercom friends by adding one more intercom participant to the three-way intercom. A new participant (D) can make it a Four-Way Intercom Conference by making an intercom call to either (B) or (C).
7.3.3 Ending Multi-Way Intercom 8 GENERAL SETTINGS You can completely terminate the conference intercom or just disconnect an intercom connection with one of your active Intercom Friends. 8.1 Function Priority • Terminate all intercom connections The headset operates in the following order of Press and hold the Multi-function Button for priority: 1 second.
8.2 Configuration Menu Configuration Enable/Disable or You can set the configuration of the headset by the Setting Execute voice menu instruction described below. 1. Press and hold the Multi-function Button for 12 seconds until you hear a voice prompt, “Configuration menu”. None Second Mobile Phone Pairing...
8.2.1 Assigning Speed Dial Configuration Enable/Disable or 1. To assign a phone number as a speed dial, Setting Execute tap the (+) Button until you hear a voice prompt, “Speed dial”. Execute Delete All Pairings 2. Tap the Multi-function Button, and you will hear a voice prompt, “Speed dial one”...
8.2.2 Voice Prompt (Default: Enable) You can disable voice prompts by configuration setting, but the following voice prompts are always Speed Dial 3 • Voice prompts for configuration setting menu • Voice prompts for factory reset 3. Call a phone number you want to assign and you will hear a voice prompt, “Save •...
9.2 Factory reset 9 TROUBLESHOOTING If you want to restore the headset to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the 9.1 Fault Reset default settings and turns off. When the headset is not working properly, you can easily reset the unit: 1.