FANATEC DD PRO Manual page 26

SEN ( SENSITIVITY )
5.6.2
Standard SEN range: 180 ... 1080
Advanced SEN range: 90 ... 2520
Sensitivity defines the degrees of rotation. If SEN is set to 90 the steering
wheel can only be turned 90° (45° left and 45° right from the calibrated
centre position). If SEN is set to 2520 the steering wheel can be turned 2520°
(1260° left and 1260° right from the calibrated centre position). If SEN is
set to AUTO, the sensitivity is controlled by the PC driver or directly by the
game (if it supports the feature).
FF ( FORCE FEEDBACK )
5.6.3
Standard FF range:
Advanced FF range: OFF
Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the GT DD PRO. If FF
is set to OFF, there will be no force feedback effect executed by the GT
DD PRO motor. If FF is set to 001, the motor will execute only 1% of the
maximum motor power. If FF is set to 100, the motor will execute 100% of
the maximum motor power. The final torque output is influenced by several
factors, including the force feedback modifiers (see below), and the in-game
settings. For stronger feedback, it is better to run a higher 'FF' value in the
Tuning Menu rather than turning up the in-game strength value (to avoid
clipping).
22
AUTO
AUTO
005 ... 100
001 ... 100
SEN default: AUTO
SEN default: AUTO
FF default: 100
FF default: 100