Functions & Features; Firmware & Driver Update; Start-Up Procedure - FANATEC DD PRO Manual

ATTENTION:
Ensure that the wheel base is in PC mode. See chapter 5.3 "Modes".
The firmware provides the GT DD PRO functionality, steering wheel
functionality, defines the compatibility, and handles the communication
between the device to PC or console, as well as to other peripheral devices
such as shifters and pedals.
For a complete guide on updating the
firmware and driver, see our
& Firmware Instructions Manual
Fanatec.com.
To turn on the wheel base, connect the system to electrical power and press
the " " button on the right side of the wheel base for about one second.
The wheel base will then immediately perform a start-up calibration. To turn
off the wheel base, press and hold the " " button for 3 seconds.
NOTE: Only use the power supply (
this product. Using any other power source is prohibited and will void the
warranty.
ATTENTION:
the wheel base shaft or attached steering wheel whilst the wheel base is
performing the start-up calibration.
15
FUNCTIONS & FEATURES
5
FIRMWARE & DRIVER UPDATE
5.1
A Windows PC is required to perform firmware updates.
START - UP PROCEDURE
5.2
To avoid injury or incorrect calibration, do not touch
Driver
on
Fanatec.com/df-manual-V1
) and power cord (
E
" " button / " " and Mode
LED Indicator.
) included with
F