Removing The Seat - Husqvarna FC 250 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20
62
S02028-10
V01369-11

Removing the seat

Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
V01319-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
–
Mount and tighten screw
Guideline
Screw, bottom M10
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
1
Remove screw .
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
60 Nm (44.3 lbf ft)
®
Loctite
C
and position.
8
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 88)
p. 49)
p. 63)
2701™