SERVICE WORK ON THE ENGINE 17
–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
V01396-10
magnet
–
Remove screws
ring.
V01397-10
–
6
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
V01398-10
–
Lay the motorcycle on its side and fill the oil filter housing to
about ⅓ full with engine oil.
–
Fill the oil filter with engine oil and position the oil filter in the
housing.
–
Oil the O-ring of the oil filter cover and mount it together with
oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
V01397-11
–
Stand the motorcycle upright.
–
Remove filler plug
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
401955-12
–
Mount and tighten the filler plug together with the O-ring.
3
with the O-ring.
M20x1.5
15 Nm (11.1 lbf ft)
1
with the magnet and a
M12x1.5
20 Nm (14.8 lbf ft)
5
. Remove the oil filter cover with the O-
out of the oil filter housing.
7
.
M6
10 Nm (7.4 lbf ft)
8
with the O-ring, and fill up with engine
1.0 l (1.1 qt.)
Engine oil (SAE
10W/50)
(
p. 138)
119