SERVICE WORK ON THE CHASSIS 11
–
Now inject the liquid into the system until it emerges from drill
6
hole
of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Tighten the bleeder screw and remove the bleeding syringe
with the hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
F00166-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
4 mm (0.16 in)
81