Advertisement
4
Remote Fluoro Controller
Fluoroscopy must be selected at the operator console to enable the remote fluoro control unit.
The default kV and mA will display on both the operator control console and on the remote
fluoro unit.
REMOTE FLUORO CONTROLS AND DISPLAY
There are four modes of operation for the unit:
• manual: - operator controls the exposure
• ABS (Automatic Brightness Stabilization)
• PF (Pulsed Fluoro) (optional)
•
PF with ABS (optional).
kV Selector and Indicator
mA Selector and Indicator
Page 26
In manual mode:
To increase kV, press +.
To decrease kV, push -.
In ABS mode:
The AUTO indicator lights and kV select
buttons are inactive.
The display will indicate the kV during the
exposure.
In manual mode:
To increase mA, press +.
To decrease mA, press -.
In ABS mode:
The AUTO indicator lights and mA select
buttons are inactive.
The display will indicate the mA during the
exposure.
Rev. H
Millenia / Indico 100 Series Operator Manual
CPI Canada Inc
740811-00
Advertisement
