Advertisement
CPI Canada Inc
REMOTE FLUORO
4
CONTROLLER (OPTIONAL)
The illustration below shows the remote fluoro controller. This unit allows the operator to select
fluoroscopy functions at a location remote from the operator control console. The remote
fluoro controller will be energized only when a fluoro technique is selected.
1. Fluoroscopy exposure indicator
2. Fluoro display: kV, mA, time (min), PPS, MAG
3. Remote ON light
4. Decrease/Increase kVp and mA buttons
5. Time zero/accum time buttons
6. Pulsed fluoro rate control
7. Magnification control for image intensifier (I.I.)
8. Aux button: selects delta dose
9. Automatic brightness stabilization (ABS) select button
10. Pulsed fluoro select button
Millenia / Indico 100 Series Operator Manual
740811-00
Rev. H
Page 25
Advertisement
