Home >
Paper Handling
Change the Check Paper Setting
If this setting is set to [On] and the paper tray is removed, the LCD displays a message asking if you want to
change the Paper Size and Paper Type settings.
The default setting is [On].
>> MFC-J1010DW/MFC-J1012DW
>> MFC-J1170DW
MFC-J1010DW/MFC-J1012DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [General Setup]. Press OK.
b. Select [Check Paper]. Press OK.
c. Select [On] or [Off]. Press OK.
3. Press Stop/Exit.
MFC-J1170DW
1. Press
[Settings] > [All Settings] > [General Setup].
2. Press a or b to display the [Check Paper] option, and then press it.
3. Press [On] or [Off].
4. Press
.
Related Information
•
Paper Settings
Related Topics:
•
Load Cut-Sheet Paper or Photo 2L Paper in the Paper Tray
•
Load Envelopes in the Paper Tray
•
Error and Maintenance Messages
>
Load Paper
>
Paper Settings
> Change the Check Paper Setting
45