Brother MFC-J1010DW Online User's Manual page 279

Hide thumbs Also See for MFC-J1010DW:

Table of Contents

Network Name (SSID)

Authentication Method

EAP-FAST/NONE

EAP-FAST/MS-CHAPv2

EAP-FAST/GTC

PEAP/MS-CHAPv2

EAP-TTLS/CHAP

EAP-TTLS/MS-CHAP

EAP-TTLS/MS-CHAPv2

EAP-TTLS/PAP

For example:

Network Name (SSID)

Authentication Method

EAP-FAST/MS-CHAPv2

If you configure your machine using EAP-TLS authentication, you must install the client certificate

issued by a CA before you start configuration. Contact your network administrator about the client

certificate. If you have installed more than one certificate, we recommend writing down the certificate

name you want to use.

If you verify your machine using the common name of the server certificate, we recommend writing

down the common name before you start configuration. Contact your network administrator about the

common name of the server certificate.

[Settings] > [Network] > [WLAN(Wi-Fi)] > [Find Wi-Fi Network].

3. When [Enable WLAN?] appears, press [Yes].

The wireless setup wizard starts. To cancel, press [No].

4. The machine searches for your network and displays a list of available SSIDs. Press a or b to display the

[<New SSID>] option, and then press it.

5. Press [OK].

6. Enter the SSID name, and then press [OK].

Encryption Mode

Encryption Mode

Mfc-j1012dw Mfc-j1170dw