Brother MFC-J1010DW Online User's Manual page 509

Level 3 Level 4
WLAN(Wi-Fi) WLAN Status
MAC Address
Wi-Fi Direct Manual
Group Owner
Push Button
PIN Code
Device
Information
Status
Information
I/F Enable
NFC -
Message from Message from
Brother Brother
Status
Web Connect Proxy Settings
Settings
Network I/F -
Network Reset -
[Print Reports]
[All Settings] > [Print Reports]
Level 3
Transmission
Address Book
Level 5
Signal
SSID
Comm. Mode
-
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
-
-
-
Proxy Connection -
Address
Port
User Name
Password
-
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Level 6 Descriptions
- View the current wireless network signal
strength.
- View the current SSID.
- View the current Communication mode.
- View the machine's MAC address.
- Configure your Wi-Fi Direct network
settings manually.
- Set your machine as the Group Owner.
- Configure your Wi-Fi Direct network
settings using the one-button push
method.
- Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
- View your machine's device name.
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
- View your machine's current IP Address.
- View the current Wi-Fi Direct network
status.
- View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
- Turn the Wi-Fi Direct connection on or
off.
- Turn the NFC function on or off.
- Display messages and notifications from
Brother.
-
Change the Web connection settings.
-
-
-
-
- Select the network connection type.
- Restore all network settings back to the
factory settings.
503