Brother MFC-J1010DW Online User's Manual page 499

Level 3 Level 4
WLAN(Wi-Fi) TCP/IP
WPS/Push Button
WPS/PIN Code
Recover WLAN
WLAN Status
MAC Address
WLAN Enable
Wi-Fi Direct Manual
Group Owner
Push Button
PIN Code
Device
Information
Status
Information
I/F Enable
Level 5
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
-
-
-
Status
Signal
SSID
Comm. Mode
-
-
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
Descriptions
Select the Boot method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
Reset and restart your wireless network.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Turn the wireless network connection On or
Off.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
Configure your Wi-Fi Direct network settings
using the one-button push method.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
View your machine's device name.
View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
Turn the Wi-Fi Direct connection on or off.
493