Brother MFC-J1010DW Online User's Manual page 378

Error Message
Cannot Clean XX
Cannot Initialize XX
Cannot Print XX
Cannot Detect
Cannot Detect Ink
Volume
Cannot Scan XX
Comm.Error
Cause
While this message appears on the LCD,
each operation works in the following way:
• Printing
If the media type is set to Plain Paper
and you selected Grayscale in the
printer driver, you can use the machine
as a black & white printer.
• Copying
If the paper type is set to Plain
Paper, you can make copies in black
& white.
• Faxing
If the paper type is set to Plain
Paper, the machine will receive and
print the faxes in black & white.
The machine has a mechanical problem.
-OR-
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
You installed a new ink cartridge too
quickly and the machine did not detect it.
An ink cartridge is not installed correctly.
If you are not using Genuine Brother ink,
the machine may not detect the ink
cartridge.
The new ink cartridge has an air bubble.
The wrong Brother model ink cartridge
was installed.
If you are not using Genuine Brother ink,
the machine may not detect the ink
volume.
The machine has a mechanical problem.
Poor telephone line quality caused a
communication error.
Action
appears, you may not be able to use the
machine until you replace one or more of
the ink cartridges under the following
condition:
• If you unplug the machine or remove
the ink cartridge.
Open the scanner cover and remove any
foreign objects and paper scraps from
inside the machine. If the error message
continues, disconnect the machine from
the power for several minutes, and then
reconnect it.
See Related Information: Paper is
Jammed Inside and in the Front of the
Machine (Jam Inside/Front).
If you cannot print documents and
received faxes, transfer them to another
fax machine or to your computer.
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Take out the new ink cartridge and
reinstall it slowly and firmly until it locks
into place.
See Related Information: Replace the Ink
Cartridges.
Use a new Genuine Brother Ink Cartridge.
If the error is not cleared, call Brother
Customer Service.
Slowly turn the ink cartridge so that the
ink supply port is pointing downward, and
then reinstall the cartridge.
Check the model numbers of the ink
cartridges and install the correct ink
cartridges.
Use a new Genuine Brother Ink Cartridge.
If the error is not cleared, call Brother
Customer Service.
Disconnect the machine from the power
for several minutes, and then reconnect it.
If you cannot print documents and
received faxes, transfer them to another
fax machine or to your computer.
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Send the fax again or connect the
machine to another telephone line. If the
problem continues, call the telephone
372