Insignia ECO Series Installation Manual

800|900|1000

Hide thumbs

page of 24

/ 24
Bookmarks

Quick Links

Download this manual

www.insigniashowers.com

Last Modified: 11/05/2021

INSTALLATION MANUAL

800|900|1000

ECO Series

30 Day Technical Support:

Call 01908 317512 and request technical support for aiding your

installation.

Replacements Parts:

Inside of your warranty period visit:

https://www.insigniashowers.com, click support and make a

warranty claim.

Spares/Replacements Parts:

Outside of your warranty period visit

https://www.insigniashowers.com/replacement-parts.html

ATTENTION INSTALLERS:

CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE

ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

These instructions must be

WARRANTY REG NO: _______________________

left with the customer

Need help?

Do you have a question about the ECO Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Insignia ECO Series

Page 1 Last Modified: 11/05/2021 INSTALLATION MANUAL 800|900|1000 ECO Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim.
Page 2 www.insigniashowers.com Last Modified: 11/05/2021 Contents Water Valve Connections Installation Assistance (Video Links) Signing off your shower Thank you for your purchase Spare Parts List Tips for assembly Steam Room & Shower Safety Guide Braided Hose QR Code/Link WEEE Compliance Statement Pressure/Tool requirements Box contents Installing the Waste and Levelling the Tray...
Page 3 Simply click the link below and watch the installation process. Shower Cabin Please note: this build video is for an Insignia Platinum Shower, however 90% of the process is the same for assembly so it should help you on your way!
Page 4 Last Modified: 11/05/2021 Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
Page 5 TIP 4—Sealing When using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and will not adhere as intended. Rubbergum is immediately waterproof and will gain additional strength over time.
Page 6 www.insigniashowers.com Last Modified: 11/05/2021...
Page 7 www.insigniashowers.com Last Modified: 11/05/2021 Pressure/Water Requirements Tools Required We recommend a BAR pressure between 2.5 and 3.4 BAR. If You will require: you have a combi boiler system no problem should be • • experienced. If you have a gravity feed older type installation Scissors Philips Screwdriver (hot water tank type usually less than 1 BAR) you will almost...
Page 8 VERY IMPORTANT ST20 or WN20 20mm Nut and Bolt or Wing Nut Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is Small Washers present.
Page 9 www.insigniashowers.com Last Modified: 11/05/2021 Step 1 — Level the Tray and connecting the waste Twist to adjust...
Page 10 www.insigniashowers.com Last Modified: 11/05/2021 Step 2 — Connecting framework Framework securing clips x4 Internal View Wider rail on top Narrow rail at the bottom...
Page 11 www.insigniashowers.com Last Modified: 11/05/2021 Step 3 — RubberGum the tray Apply RubberGum to raised sections of the tray and remove backing paper. Step 4 — Fix framework to the tray PRESS FRAME DOWN FIRMLY ONTO THE RUBBERGUM.
Page 12 www.insigniashowers.com Last Modified: 11/05/2021 Step 5 — Connecting the back panels ST16 x12 PRESS PANELS DOWN FIRMLY ON TO THE RUBBERGUM. DO NOT SCREW BACK PANELS TO THE TRAY.
Page 13 www.insigniashowers.com Last Modified: 11/05/2021 Step 7 — Column Connection ST20 x 12 SW9 x 12 WN20 x 12 Rear View (attach nuts and bolts or wing nuts from rear) Below diagram shows the nut/bolt install ———————— ————————...
Page 14 www.insigniashowers.com Last Modified: 11/05/2021 Step 8 — Fixed Glass Connection ST16 x 2 Internal View Use outer hole Slide glass in Repeat process for other side Attach Upright...
Page 15 www.insigniashowers.com Last Modified: 11/05/2021 Step 9 — Fitting the glass seals Fit seal inside the shower between the glass and framework 12mm 2x 12mm Seals 2x 7mm Seals Step 10 — Fitting the door stops Internal View — Top Rail ST10 x8 SP072 x8 Internal View —...
Page 16 www.insigniashowers.com Last Modified: 11/05/2021 Step 11 — Attaching the Roof Screw from the rear ST16 x6 Step 12 — Fit door handles, seals and magnets...
Page 17 www.insigniashowers.com Last Modified: 11/05/2021 Step 13 — Fit top door wheels x 4 Tighten to secure wheels into door runners. DO NOT OVERTIGHTEN Slide cover off Door Step 14 — Fit bottom door wheels x 4 Slide cover off Door Step 15 —...
Page 18 www.insigniashowers.com Last Modified: 11/05/2021 Step 16 — Accessory Installation Slide cover off Slide cover off...
Page 19 www.insigniashowers.com Last Modified: 11/05/2021 Step 17 — Valve/Water Connections Monsoon Head Hand Shower Jets 2 x Washers located on Cold Water Inlet Hot Water Inlet the back of the valve Connection for steam generator (steam version only)
Page 20 3. Do not aim the hand shower directly at the joints of your shower as this does not fall under “normal showering conditions”. However, due to Insignia’s unique design of the shower tray, water will only leak back in to the tray so you won’t get flooded.
Page 21 www.insigniashowers.com Last Modified: 11/05/2021 Parts List Part Code Part Description SP300 Waste hose SP010 Monsoon Shower head SP308 Magnetic door seals SP002 Round Body Jet (Two Open Ends) SP310 Rear door seals SP285 3 port—2 feed non- SP002A Round Body Jet (One Open End) thermostatic valve SP236 Complete riser bar...
Page 22 www.insigniashowers.com Last Modified: 11/05/2021 Steam Room & Shower Safety Guide Never leave children unattended in the shower or bath. Never bath children (under 12) using whirlpool function if fitted. Regulate the temperature of water before showering. Never allow children to use the steam function. This function is for ADULTS ONLY. Always be aware of the steam outlet position.
Page 23 (EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
Page 24 All images are registered with ImageTraker Insignia™ is a registered trademark of Maclean International Ltd All images are subject to copyright. Images may not be used in any way shape or form with out written permission from Maclean International Ltd. Images are NOT permitted...

This manual is also suitable for:

800 900 1000