BiLine Combio-868 MVLED/ MLED
3.3
Operation
To switch the hand transmitter channel, see the hand transmitter operating
instructions.
The MVLED/MLED remote-receiver has been pre-set in the factory to perform the following
functions when used together with a hand transmitter:
•
Channel 1 = Awning and Valance Plus
•
Channel 2 = Light
•
Channel 3 = Other component (optional)
The table below describes the factory default settings.
Channel/Component Component
1 Awning and
Valance Plus
(MVLED only)
2 or 3 Light or other
component
Table 1: MVLED/MLED remote-receiver functions
Item number 116692-0000
Version 2
15.11.2013
Briefly press DOWN
key
Briefly press DOWN
key
MVLED only
Briefly press UP key
Press STOP key
Press and hold
UP/DOWN key
or
Press and hold
UP/DOWN key
or
Press STOP key
We reserve the right to make technical
changes
Page 7/28
Assembly and installation instructions
Function
-
Awning extends completely
-
Valance Plus then extends
(to sun protection position)
Valance Plus retracts completely, then
awning retracts automatically
Stop
Switch on light
Control dimming
Switch off