BiLine Combio-868 LED
3.3
Operation
To switch the hand transmitter channel, see the hand transmitter operating
instructions.
The LED remote-receiver has been pre-set in the factory to perform the following functions when
used together with a hand transmitter:
•
Channel 1 = Light
•
Channel 2 = Other component (optional)
The table below describes the factory default settings.
Channel/Component Component
Light
Table 1: LED remote-receiver functions
Item number 116739-0000
Version 2
15.11.2013
Press and hold
UP/DOWN key
or
Press and hold
UP/DOWN key
or
Press STOP key
We reserve the right to make technical
changes
Page 6/24
Assembly and installation instructions
Function
Switch on light
Control dimming
Switch off