Maintenance And Repairs; Maintaining The Remote-Receiver - weinor BiLine Combio-868 MVLED Assembly And Installation Instructions Manual

BiLine Combio-868 MVLED/ MLED
7

Maintenance and repairs

DANGER
Electric shock!
 Work involving 230 V mains may only be carried out by a trained electrician.
 Disconnect the unit from the power supply before performing any work.
7.1

Maintaining the remote-receiver

It is not possible to carry out repairs on the remote-receiver itself. In the event of a malfunction or
defect, the device will need to be replaced.
If a component does not react as expected, you must check the connections.
You should:
•
check that the connectors are correct and have been tightly connected
•
test all line contacts
Item number 116692-0000
Version 2 15.11.2013
We reserve the right to make technical
changes
Page 12/28
Assembly and installation instructions