EUROM Golden 2000 Amber Focus Instruction Manual page 30

 To stop the unit, first press the 'off' button on the remote control. Then turn it
off by pressing the on/off-switch (5) to 'O' (off). Finally, unplug it from the wall
outlet. Allow the heater to cool down.
Warning!
 When you turn off the unit using only the remote control (or the app), the
'standby' remains. So turn it off using the remote control (c.q. the app) or the
on/off-switch and remove the plug from the socket!
 Remove the batteries out of the season, that will extend the life of the remote
control.
 When you use the appliance for the first time (or after a long time again),
observe it during the first 10 till 15 minutes to be sure that is works trouble-free.
The reset button
You can use the reset button in three situations (see below):
- To operate the device without the remote control. Every time that you press the
reset button (briefly), the output changes from: > 2000 W > 1320 W > 660 W >
off.
- To switch the device back on without the remote control, after the shock
safeguard has turned it off (see: Shock safeguard).
- To set or change the password for the app control.
- If you press the reset button for least 4 seconds, the device will return to the
factory settings.
Control with Bluetooth and Eurom Heating app
Using the app, you can: remotely switch the device On and Off - continuously
regulate the heat output from 0 to 100% - Set a timer to switch off the device
automatically – set multiple devices individually.
1. Open the APP Store or Google Play on your smartphone and look for the app
called Eurom Heating.
2. Download the Eurom Heating app.
3. Make sure that Bluetooth is switched on in the settings of your smartphone.
4. Switch on the terrace heater using the On/Off button at the top of the heating
cap.
5. Briefly press once on the reset button (at the top of the heating cap) to switch
on the device.
6. Subsequently, open the Eurom Heating app on your smartphone.
7. To connect your terrace heater to the app, you should take the following steps:
Go to the button at the left-hand bottom corner of the Home screen (Fig. 1).
-
Move the bar to the right to switch on the device (Fig. 2).
-
When using the device for the first time, you will be asked to enter a
-
password. The default password is 12345678 (Fig. 3). If the password is not
accepted, you can reset the password by pressing the reset button for 5
seconds.
30