Safety Information - PROIETTA CASE AF10 Instruction Manual

SAFETY INFORMATION

Read the following security information carefully before performing any operations. The
product described in this manual is an outdoor protective case for video projectors.
Any other use is not provided by the manufacturer and therefore relieves him of any
liability for damages arising from misuse.
Be sure to securely attach the protective case to an architectural element that ensures its
stability and reliability. All elements used for installation (screws, bolts, brackets, etc.)
must always be adjusted to the load they need to support.
Use an M12 bolt with a self-locking nut and use a security chain in the event of a
suspended installation.
The protective case should always be connected to the power supply even when the
video projector inside is turned off. This ensures constant ventilation during hot days or
maintaining a warmer temperature on cold days, ensuring that the projector works
properly.
For proper use, before using the protective case, read carefully the instruction manual of
the video projector that you plan to install inside. The minimum temperature sustained by
the protective case is -25°C. The maximum temperature supported is 5°C lower than the
maximum operating temperature shown in your projector's instruction manual.
e.g. A video projector with an operating temperature from 0°C to 45°C —> operating
temperature insured by the protective case: from -25°C to 40°C.
Do not place objects on the power cable and in case of damage to the manufacturer for
replacement in order to avoid dangers of electrocution.
The only maintenance operation allowed in warranty is the replacement of the filters. Any
other repairs must be carried out solely by the manufacturer, who denies any
responsibility for unauthorized interventions.
Air intakes should never be covered or clogged with any material. Be sure to provide
adequate ventilation to the case to protect it from overheating. The protective case
should not be placed in a closed installation or in a compartment that is too small and
without enough ventilation.
Never touch the protective case and all its components with wet hands.
Never place the protective case on flammable and/or combustible surfaces.
1