Table of Contents
Advertisement
LED 5
Green LED reports the speed of the air extraction fan:
- a flash —> speed I
- two flashes —> speed II
- three flashes —> speed III
LED 6
Red LED reports a malfunction of 3.3V voltage for the power supply of the probes.
LED 7
Green LED reports the presence of 3.3V voltage for the power supply of the probes.
LED 8
Green LED reports the presence of 3.3V voltage for the power supply of the external
modules (e.g. Bluetooth).
LED 9
Red LED reports a malfunction of 3.3V voltage for the power supply of the external
modules (e.g. Bluetooth).
SWITCH FOR THE BOARD CONFIGURATION
Configuration switch
External probe mode configuration switch
Placing the stick on 1 you activate the mode
without external probe
14
Advertisement
Table of Contents
