PROIETTA CASE AF10 Instruction Manual page 9

FIXING THE VIDEO PROJECTOR
Take as a reference the video projector fastening holes by helping with the semi-
transparent paper; mark the placement of the holes in the projector screws.
Remove Plate A from the main one, mark the holes onto plate A from the paper and drill
according to the diameter of the screws of your video projector.
On the opposite side of Plate A use a countersink (1) to create a hole to insert a flat-
headed conical screw.
Attach the video projector to Plate A using the appropriate screws (2) for your video
projector (choose flat conical head screws) and insert both into the case.
1 2
7