Table of Contents
Advertisement
POWER CONNECTION
Connect your case to the current according to the security rules currently in force in your
country/region.
The supply voltage must be: 220-240 V, 50-60 Hz and the supply line must be protected
by an efficient grounding link and is equipped with a bipolar switch with differential
thermal 0.03 A safety.
For safety reasons it's essential to leave the film applied on top of the glass to avoid the
fall of dangerous pieces of glass in case of breakage. Cut only the area affected by the
projection beam.
E
D
D) Power cable
for main outlet
included.
E) Sealed input
for signal cables
(hdmi/audio/
ethernet).
6
CABLE INPUT BELOW THE CASE
Place the signal cables in the
appropriate input below the case
and make sure to establish the press
to prevent water from entering
Advertisement
Table of Contents
