PROIETTA CASE AF10 Instruction Manual page 12

1) Download the application from Apple Store o Google Play by typing PROIETTA
Exterior Projector.
2) When the installation is complete, open the app and allow location services on your
device.
3) Select LISTED PAIRED DEVICE and, among the different bluetooth connection
options, choose the one that coincides with the serial number of the PROIETTA
product that you want to monitor.
e.g. 25K20200502
4) Confirmed the request for association between app and product enter the PIN that
coincides with the last 6 numbers of the serial.
e.g. 25K20200502
5) When you open the main screen to monitor your product, a flashing red dot in the top
right of the screen confirms that you have paired it with the app.
If you need to adjust the fan speed manually: set the MAN mode. The starting speed will
be maximum and you can go down in speed, but without going below the minimum
provided by the board in the conditions of use.
PROIETTA APP INSTALLATION
Model
Serial Number
Temperature inside the case
Incoming Temperature
Humidity
Heating Status (ON-OFF)
Status: reports any error
Fan can work in automatic or manual mode
AUTO automatic speed of the fans.
I,II,III report at what speed the fans are working at.
10