Advertisement
Before You Brew
1
Plug & Place
Remove packing tape from coffee
maker. Plug into a grounded outlet.
Place a large mug (296 ml/10 oz) on
the drip tray.
3
Lift & Lower
Lift and lower the handle. Do not
insert a K-Cup® pod. The coffee
maker will power on automatically.
Brew Your First Cup
5
Place Mug & Pod
Place a mug on the drip tray. If using a
travel mug, remove the drip tray and
place the mug on the drip tray base.
Lift the handle and place a K-Cup® pod
in the K-Cup® pod holder. Lower the
handle completely to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
For bolder coffee press the STRENGTH button until you have
reached the desired level of strength, then select brew size,
BREW button.
followed by the
For hotter coffee press the TEMP button until you have reached
the desired level of heat, then select brew size, followed by the
BREW button.
For iced beverages fill a large plastic tumbler with ice. Insert
any K-Cup® pod, then press the OVER ICE button, followed by
BREW button.
NOTE: Choose a tumbler large enough to accommodate both the ice and dispensed liquid
to prevent overflow.
To set a preference, use the 3 user profile buttons. Once the
desired brew size, strength, and temperature settings are chosen,
press and hold one of the user profile buttons to save your
settings.
Once saved, you can press the user profile button followed by the
BREW button.
2
Power Button
Over Ice
1
2
3
Remove the water reservoir lid, then lift
4oz
12oz
6oz
10 oz
8oz
the reservoir straight up to remove it. If
you have a Keurig
now. Refer to your Water Filter Starter
Kit for instructions.
Rinse reservoir with fresh water and fill
to the MAX FILL line.
Replace water reservoir, making sure
the lock tabs engage with the coffee
maker. Replace lid.
NOTE: Do not use distilled water.
4
The 5 cup sizes will blink. Press the 8oz
button, then press the blinking BREW
button to start a cleansing brew. Pour
the hot water into the sink. Do not
remove the water reservoir once the brew
button has been pressed until the brew has completed.
The one-time setup process is now complete and you are
ready to brew!
6
The 5 brew size buttons will blink.
Select your brew size, then press
the blinking BREW button. The brew
button will remain illuminated while
brewing. Brewing is complete when
the buttons are no longer illuminated.
Lift the handle and dispose of the
K-Cup
CAUTION: While brewing, there is extremely hot water
in the K-Cup® pod holder. To avoid injury, do not lift the
handle during the brewing process.
Coffee Maker Features
Smart Start heats then brews in one simple process. No need to wait
for the coffee maker to heat before selecting brew size. Simply power on
your coffee maker by lifting the handle, insert a K-Cup
brew size, and press the BREW button. The coffee maker will heat, then
automatically begin brewing.
Auto Off automatically turns your coffee maker off 5 minutes after the
last brew for energy savings.
High Altitude To ensure your coffee maker works properly at higher
altitudes (1,500 metres/5,000 feet) please enable the High Altitude
Brewing Mode on your coffee maker.
1. Power the coffee maker off while it is plugged in.
2. Press and hold the BREW and 8 oz buttons for 3 seconds. The 12 oz
button will illuminate to confirm that the High Altitude Brewing Mode
has been enabled.
ATTENTION!
This coffee maker is only compatible with the newly designed
Keurig® My K-Cup® Universal Reusable Coffee Filter.
Do not attempt to use any other reusable filter or previous
versions of Keurig® My K-Cup® Universal Reusable Coffee Filter;
may cause damage to coffee maker.
Rinse & Fill
Water Filter, install it
®
Cleansing Brew
Brew & Enjoy!
pod.
®
Over Ice
1
2
3
4oz
12oz
6oz
10 oz
8oz
Over Ice
1
2
3
Brew Button
4
12
oz
oz
6
10
oz
oz
1
8
oz
Over Ice
1
2
3
Brew Button
4
12
oz
oz
6
10
oz
oz
8
oz
pod, select your
®
Advertisement
