Energy Efficiency - AEG BPE842720M User Manual

44 www.aeg.com
Problem
The display prompts to set
the Language.
The display prompts to set
the Language.
The display shows F111.
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. ENERGY EFFICIENCY

13.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Possible cause
There was a power cut lon‐
ger than 3 days.
The demo mode is activated. Turn off demo mode in:
The plug of the food sensor
is not correctly installed into
the socket.
There is an electrical fault.
You left the dish in the oven
for too long.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Refer to "Before first use"
chapter.
Menu / Basic Settings /
DEMO. Activation / deactiva‐
tion code: 2468.
Put the plug of the food sen‐
sor as far as possible into
the socket.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De‐
partment.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
AEG
BPE842720M 944187981
BPK842720M 944187982