AEG BPE842720M User Manual page 40

40 www.aeg.com
11.2 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1
Step 2
Step 3
Step 4
11.3 How to use: Pyrolytic
cleaning
Clean the oven with pyrolytic cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and
wait until it is cold.
Step 1
Turn on the oven.
Option
Quick
Turn off the oven and wait un‐
til it is cold.
Loosen the screw. Pull the
front of the shelf support
away from the side wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
Before the pyrolytic cleaning:
Remove all accessories ex‐
cept for shelf supports and
telescopic runners.
Select: Menu / Cleaning.
1
Step 2
Cleaning mode
Light cleaning
2
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as this
function. It can cause
damage to the oven.
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild deter‐
gent.
Step 3
Turn the knob to select the
cleaning mode. Press the knob
to confirm.
Duration
1 h