AEG BPE842720M User Manual page 18

18 www.aeg.com
• Ingredients should be at room
temperature.
• The Food Sensor cannot be used for
liquid dishes.
• During cooking the Food Sensor must
remain in the dish and the plug in the
socket.
• Use recommended food core
temperature settings.
WARNING!
Refer to "Hints and tips"
chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set oven
function and temperature.
Food categories: meat,
poultry and fish
1. Activate the oven.
2. Insert the tip of the Food Sensor into
the centre of meat or fish, in the
thickest part if possible. Make sure
that at least 3/4 of the Food Sensor is
inside of the dish.
3. Put the plug of the Food Sensor into
the socket at the front of the oven.
The display shows: Food Sensor.
4. Set the core temperature.
5. Set a heating function and, if
necessary, the oven temperature.
When the dish reaches the set
temperature the signal sounds. The oven
turns off automatically.
6. Press the rotary knob to stop the
signal.
7. Remove the Food Sensor plug from
the socket and remove the dish from
the oven.
WARNING!
There is a risk of burns as
the Food Sensor becomes
hot. Be careful when you
unplug it and remove it from
the food.
Food category: casserole
1. Activate the oven.
2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the Food Sensor
exactly in the centre of the casserole.
The Food Sensor should be
stabilized in one place during baking.
Use a solid ingredient to achieve
that. Use the rim of the baking dish to
support the silicone handle of the
Food Sensor. The tip of the Food
Sensor should not touch the bottom
of a baking dish.
4. Cover the Food Sensor with the
remaining ingredients.
5. Put the plug of the Food Sensor into
the socket at the front of the oven.