Advertisement
Quick Start Guide
Getting Started with the
actidata Ti-NAS QT-6, QT-7, QT-8
QSG_actidata_tinas-qt-english _Ver_02
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Actidata Ti-NAS QT-6
Summary of Contents for Actidata Ti-NAS QT-6
- Page 1 Quick Start Guide Getting started with the actidata Ti-NAS QT-6, QT-7, QT-8 QSG_actidata_tinas-qt-english _Ver_02...
- Page 2 6. All warranty disclaims in case of wrong mounting, wrong connecting, wrong operation, or any use where the system is not built for. 7. Please take care of backups. actidata Storage Systems GmbH assumes no liability for data loss. Service-Registration: Each system is supplied with a service certificate.
- Page 3 2. Overview: Panel and Connections The control elements of the actidata Ti-NAS QT-6, QT-7, QT-8 are shown below. Depending on the configuration, the actidata Ti-NAS system is equipped with a LTO-drive and HDDs, SSDs of different capacity and number. The selection of component manufacturers can also vary.
- Page 4 • Keyboard+Mouse, VGA / USB 3.0 SFP+ Transceiver: SFP+ Transceivers are not part of the scope of delivery. It is recommended to use certified SFP+ Transceivers which are compatible to your LAN switch. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 5 3. Getting started After you have got an overview of the control panel and interfaces of the actidata Ti-NAS QT, the system can be started. After pushing the power-on button at the front, the actidata system starts the boot routines. Now you can connect via RDP (Remote Desktop). The access data, the defined network IPs can be found in the enclosed document „Important Information“, the...
- Page 6 Warning Mail, SNMP Disable the HDD Alarm by pressing the Alarm Mute Button on the front. Disable the RAID-Alarm in the MegaRAID Storage Manager. Select „Silence Alarm“ on the Dashboard. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 7 When installing HDDs / SSDs, which are not qualified by the manufacturer, the function may be restricted and / or malfunctions may occur that are not covered by the guarantee services of actidata Storage Systems GmbH. The system guarantee is void in the event of improper installation or installation / configuration of third-party components.
- Page 8 I: www.actidata.com All right reserved actidata Storage Systems reserved all rights on this document. Any copy in print or electronical way or use outside the described use are forbidden. Changes will be done without any notice. No liability in case of any mistake or error in this document.
Need help?
Do you have a question about the Ti-NAS QT-6 and is the answer not in the manual?
Questions and answers