Advertisement
Quick Start Guide
Getting Started with the
actidata Ti-NAS QT6, QT7, QT8
QSG_actidata_tinas-qt-english _Ver_01
Advertisement
Table of Contents
Related Manuals for Actidata Ti-NAS QT6
Summary of Contents for Actidata Ti-NAS QT6
- Page 1 Quick Start Guide Getting started with the actidata Ti-NAS QT6, QT7, QT8 QSG_actidata_tinas-qt-english _Ver_01...
- Page 2 6. All warranty disclaims in case of wrong mounting, wrong connecting, wrong operation, or any use where the system is not built for. 7. Please take care of backups. actidata Storage Systems GmbH assumes no liability for data loss. Service-Registration: Each system is supplied with a service certificate.
- Page 3 2. Overview: Components and Connections The components used in the actidata Ti-NAS QT6, QT7, QT8 are shown below. Depending on the configuration, the actidata Ti-NAS system is equipped with a LTO-drive and HDDs, SSDs of different sizes and numbers. The selection of component manufacturers can also vary.
- Page 4 SFP+ Transceivers are not part of the scope of delivery. It is recommended to use certified SFP+ Transceivers which are compatible to your LAN switch. On the front you can find the following elements and displays: actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 5 NAS QT, the system can be started. Therefore connect a monitor to the VGA connection on the back of the actidata system. There are USB 3.0 interfaces for keyboard and mouse on the back. After the system has been connected to power, the system can be put into operation. Set the power supply on the rear to ON.
- Page 6 On the NAS by remote as well. You can also download the IPMI-logs, by clicking the Button „Save Event Logs“. Please change the password of the IPMI after the first access. actidata Storage Systems GmbH – D-44149 Dortmund – Wulfshofstr. 16...
- Page 7 When installing HDDs / SSDs, which are not qualified by the manufacturer, the function may be restricted and / or malfunctions may occur that are not covered by the guarantee services of actidata Storage Systems GmbH. The system guarantee is void in the event of improper installation or installation / configuration of third-party components.
- Page 8 I: www.actidata.com All right reserved actidata Storage Systems reserved all rights on this document. Any copy in print or electronical way or use outside the described use are forbidden. Changes will be done without any notice. No liability in case of any mistake or error in this document.
Need help?
Do you have a question about the Ti-NAS QT6 and is the answer not in the manual?
Questions and answers