1. Manuals
  2. Brands
  3. Actidata Manuals
  4. Storage
  5. actiNAS BB212-3
  6. User manual

Actidata actiNAS BB212-3 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
User Information for barebone actiNAS BB212-3
used within the storage systems
actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212
Contact Information Manufacturer:
actidata Storage Systems GmbH
Wulfshofstr. 16, D- 44149 Dortmund, Deutschland (Germany)
T: +49 (0) 2 31/56 36 32 – 0 (Switch Board)
T: +49 (0) 2 31/56 36 32 – 35 (Service Hotline)
E: service@actidata.com
I: www.actidata.de
UserG_actiNAS_WIN_LX_SV_Ver_01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the actiNAS BB212-3 and is the answer not in the manual?

Questions and answers

Related Manuals for Actidata actiNAS BB212-3

Summary of Contents for Actidata actiNAS BB212-3

  • Page 1 User Guide User Information for barebone actiNAS BB212-3 used within the storage systems actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Contact Information Manufacturer: actidata Storage Systems GmbH Wulfshofstr. 16, D- 44149 Dortmund, Deutschland (Germany) T: +49 (0) 2 31/56 36 32 – 0 (Switch Board) T: +49 (0) 2 31/56 36 32 –...
  • Page 2 BB212-3. It mainly introduces and describes the characteristic parameters, system configuration and installation mode of this product. This type of storage server of actidata supports one controller module and this system is integrated based on 2U12bay cabinet and G1DCW motherboard.

  • Page 3: Table Of Contents

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Content Chapter 1 Product Introduction ......................4 1.1 System features ......................... 4 1.2 Board features ........................8 1.3 Server chassis system features ................. 10 1.4 System view ........................

  • Page 4: Chapter 1 Product Introduction

    WIN 212 / actiNAS LX 212 / actiNAS SV 212 Chapter 1 Product Introduction 1.1 System features 1.1.1 System parameters Model actiNAS BB212-3 barebone – Motherboard-Features Processor Dual CPU-MB for Intel Broadwell EP E5-2600 V4 system (Socket R3 LGA 2011) Critical...
  • Page 5 Dimensions 2U Rack Mount,675mm*448mm*88mm 1.1.2 System overview actiNAS BB212-3 barebone system is a kind of 2U dual server product with high-density, low-power and controller architecture, appropriate for big data analysis, cloud computing, virtualized computing, and Internet applications, etc. System hardware consists of three modules, namely the hard disk module, controller module and power module;...
  • Page 6 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212  Controller system uses the INTEL Grantley-EP platform with the latest generation of INTEL E5-2600 V3 HASWELL and E5-2600 V4BROADWELL CPU, and the maximum capacity of 145W ...
  • Page 7 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 System structure diagram is as follows: Page 7 of 70...

  • Page 8: Board Features

    1.2 Board features 1.2.1 Board parameters: actiNAS BB212-3 with G1DCW dual server motherboard is based on Intel X86 architecture, which uses Intel Grantley-EP platform based on Intel PCH C612 chipset, accompanied with the latest generation of Haswell E5v3 CPU, which is...
  • Page 9 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Motherboard SY201D12REH-BF CPU of Intel Broadwell EP E5-2600 V4 system (Socket R3 Processor LGA 2011) 1.2.2 Diagram of motherboard hardware chip function:...

  • Page 10: Server Chassis System Features

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 1.3 Server chassis system features 1.3.1 Chassis parameters Basic parameters Chassis style Rack-mounted Chassis structure Adaption actidata G1DCW motherboard Support hot-plug Pluggable...
  • Page 11 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 1.3.2 System power supply Chassis: 550W1+1 redundant platinum label efficiency power supply, and support hot-plug replacement;  Input AC voltage：100-127V~/ 9.9A；200-240V~/ 4.79A；...

  • Page 12: System View

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 1.4 System view 1.4.1 Front view 1.4.2 Rear view Page 12 of 70...
  • Page 13 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 1.4.3 Front panel buttons and indicator lights: The buttons and LED indicators on front panel are as follows, and the functions and status of each button or light are described, as follows:：...
  • Page 14 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Green light always Network port 4 is ⑨ connected normally Blue light always on Hard disk location ⑩ Yellow light always Hard disk alarm Green light always ⑪...
  • Page 15 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Hard disk Always on in place Hard disk Always on in place Hard disk Flashing 4Hz/sec activity Hard disk Flashing Always on...

  • Page 16: Chapter 2 System Interface Introduction

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Chapter 2 System Interface Introduction 2.1 Overview The main interfaces in system are distributed on the motherboard, and the interface layout of motherboard is described as follows: 2.1.1...
  • Page 17 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.1.1 G1DCW motherboard interface and definition: 1. Diagram of motherboard interface location: Page 17 of 70...
  • Page 18 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2．Motherboard interface definition: Main Connectors on G1DCW motherboard Connector No Description Comment VGA Connector LED-POWER Button (switch Green, yellow button with two-color indicator...
  • Page 19 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 GPU1_POWER2 GPU1 Power Connector2 GPU1 Power connector2 GPU2_POWER1 GPU2 Power Connector1 GPU2 Power connector1 GPU2_POWER2 GPU2 Power Connector2 GPU2 Power connector2 CPU_XDP1...
  • Page 20 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 CPU1-DIMMC2 CPU1 memory channel C, 2 DIMM CPU1 memory channel D, 1 CPU1-DIMMD1 DIMM CPU1-DIMMD2 CPU1 memory channel D, 2 DIMM CPU2-DIMME1...
  • Page 21 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 AirMax high-speed signal Used to connect SPIB connector Power connector Used to connect SPIB Power connector Used to connect SPIB Guide pin...

  • Page 22: Motherboard Io Interface

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2 Motherboard IO interface 2.2.1 Switch button Press the switch button to start the system, and the location is indicated by the...
  • Page 23 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 In the hanger indicator on front panel is a power button, and press the button for boot or shutdown, Page 23 of 70...
  • Page 24 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.2 System ID (identity) indicator System ID indicator is designed to allow users to identify the machine with the current operation more intuitively, and its specific location on motherboard is as...
  • Page 25 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 IPMI LAN port The network port is special for IPMI (CONN1), used for IPMI remote management, and it is connected into switchboard with CAT5 cable and above, also directly connected to the customer's host;...
  • Page 26 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 LAN port Motherboard provides four kilomega Ethernet ports (J9 and J10), the main chip uses Intel I350-AM4, self-adaptive 1000M, 100M and 10M, 4 Gigabit Ethernet...
  • Page 27 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.4 SFP+ Ports The motherboard supports two SFP + Port (J11), and the main chip uses Intel JL82599ES chip. The optical connectors use the 2X1 piled connector; SFP+...
  • Page 28 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Location diagram: * The image is for reference only 2.2.3 USB interface Two external USB3.0 ports (CONN1) are used to access each device of USB Type A, such as debugging USB keyboard and USB drive, etc., and USB location is as...
  • Page 29 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.4 USB3.0 Type A Connector Motherboard has one USB3.0 TYPEA straight connector (USB1), used to access USB devices, and the location is as follows:...
  • Page 30 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 PIN is defined as follows: Definition of USB3.0 Port Pin PIN order Description Comment PIN1 PIN2 PIN3 PIN4 Ground PIN5 StdA_SSRX- PIN6...
  • Page 31 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 PCI- slot The motherboard has a built-in 3 PCI-E Slot, PCI-eX16 Slot of CPU1_SLOT1 with the rate of PCI-eGen3 8Gb/s; CPU2_SLOT1 is also a X16 Slot, and the other one is CPU2_SLOT2, X8 Slot with the rate of PCI-eGen3 8Gb/s.
  • Page 32 PIKE card slot The SAS Controller card can be inserted into the mainboard, used to support SAS hard disk, and SAS adopts the PIKE card self-developed by actidata (non-standard). The PCI-e X8 signal of CPU1 is connected to the PIKE card via PCI-e X8 Slot.
  • Page 33 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 Introduction of M.2 port The motherboard supports 1*M.2SSD (J23), and this M.2SSD must be PCI-e interface type, and M.2 of SATA interface does not support this, but supports PCI-eGen3 X4 with the backward compatibility with PCI-eGen2 or X2, X1;...
  • Page 34 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 Introduction of AIRMAX connector The motherboard adopts AirmaxVS2 connector to connect SPIB system, and supports the high-speed 12GSAS signal transmission, as shown in the figure below;...
  • Page 35 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 Introduction of GPU power PORT The motherboard can support two GPU cards, and each GPU card requires two power connectors; GPU1_POWER1 and GPU_POWER2 are used for GPU1, while GPU2_POWER1 and GPU2_POWER2 are used for GPU2;...
  • Page 36 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Location diagram: Page 36 of 70...
  • Page 37 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 Introduction of DIMM SLOT The motherboard is designed with 16 slices of DDR4 DIMM SLOT, supports DDR4-2133/ 1866/1600 ECC RDIMM or ECC LRDIMM. And the compatible BROADWELL CPU supports the memory bandwidth of DDR4-2400 at most.
  • Page 38 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Memory of RDIMM/LRDIMM ECC is as follows： Speed(MT/S),Voltage(V) DPC=DIMM per Channel Ranks DIMM Capacity 1 Slot Per 2 Slot per Channel (GB)
  • Page 39 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.4 Introduction of CPU SOCKET CPU1/CPU2 is LGA-2011 R3 SOCKET, supports CPU of INTEL E5-2600V3 series, and is compatible with Broadwell E5 v4 LGA2011 CPU, as shown below:...
  • Page 40 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.2.3 Introduction of JTPM1 port JTPM1 connector supports LPC/TPM module, supports TPM2.0 trusted module, and uses 20PIN connector, and the specific location is as follows: Comment: “□”...

  • Page 41: Jumper Setting

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.3 Jumper setting G1DCW motherboard has 3 2PIN pins, and the following chart shows the differences of these 2PIN pin and their function:...
  • Page 42 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 G1DCW single-plate 2PIN 2PIN order Description Default setting JCMOS1 CMOS Clear No need to insert a jumper cap ManufactureModeSelect No need to insert a...

  • Page 43: Led Description

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2.4 Power Module The arrow in the figure above is the LED indicators of the power supply module. Each power supply module has its own LED display status.

  • Page 44: Chapter 3 Detailed Controller Module Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Chapter 3 Detailed Controller Module Installation This chapter describes the installation procedure for each major component on the system node, including the installation of CPU, heat sink, memory, fan module, backplane, PIKE card, and expansion card.

  • Page 45: Cpu Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 3.3 CPU installation Precautions: 1. Please purchase Intel CPU through formal channels. 2. Make sure that the processor you purchased belongs to the supported type for this system.
  • Page 46 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 2. Press the right securing wrench (D) and push it slightly to the left (E) until the wrench comes out of the retaining clip; and then gently lift the non-adjustable wrench (F).
  • Page 47 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 4. Align the CPU with the slot, and make sure that the triangle mark on CPU aligns with the triangle marks on the socket, and carefully insert the CPU in the socket.
  • Page 48 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 6. Push down the right non-adjustable wrench (I) and make sure that the edge of the top cover of the mounting box is fixed by wrench (J), and insert the non-adjustable wrench.

  • Page 49: Cpu Heat Sink Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 3.4 CPU heat sink installation 1. Remove the heat sink and apply the appropriate amount of hot silicone paste on the bottom of the heat sink.
  • Page 50 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Page 50 of 70...

  • Page 51: Memory Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 3.5 Memory installation Note: Be careful when installing or removing DIMM modules to prevent any possible damage to the DIMM or slots.
  • Page 52 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Memory support specifications The motherboard supports the DDR4 memory of 4GB / 8GB / 16GB and 32GB R-DIMM or 32GB and 64GB of LR-DIMM and NVDIMM, supports 2400MHz at most (2400MT/s only in BroadwellCPU and each single channel).
  • Page 53 WIN 212 / actiNAS LX 212 / actiNAS SV 212 Memory setting rules Note:  Refer to actidata's official website for the memory compatibility list to make your selection.  To install a single memory module in a single CPU, install the memory module in the A1 or B1 slot.

  • Page 54: Pike Card And Expansion Card Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 3.6 PIKE card and expansion card installation System controller module uses the standard LSI SAS2008 chipset PIKE card, also supports up to four full-height PCI-e expansion cards or two full-height full-width GPU cards.
  • Page 55 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Note: make sure that the PIKE card is in place. 3.6.2 Installation of PCI-e Expansion Card: Note: pay attention to the balanced force in the installation to ensure that the expansion card is inserted into the motherboard vertical.
  • Page 56 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 If you need to install the full width of the GPU card,as picture below） Note: need to change the cooler to 1U height, install the power...

  • Page 57: Fan Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 4.2 Fan installation The system adopts the modular fan wall for heat dissipation. And the wind wall support module has screw-free tools for installation. The installation diagram is as follows:：...
  • Page 58 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Installation completed Page 58 of 70...

  • Page 59: Controller Module Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 4.3 Controller module installation The system adopts modular installation, which is hot-swappable; it has the simple and convenient installation and maintenance. Installation diagram is as...
  • Page 60 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Page 60 of 70...

  • Page 61: System Hard Disk Installation

    User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 4.4 Hard disk installation System hard disk installation The system supports 12 3.5 or 2.5-inch hard drives, and the installation of each hard disk is the same, as follows: 4.4.2 2 *2.5-inch hard drives installation in the rear...
  • Page 62 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Page 62 of 70...
  • Page 63 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Page 63 of 70...

  • Page 64: Chapter 5 System Cabinet Installation

    System Cabinet Steps actiNAS BB212-3 server barebone system adopts a full set of non-screw-free tool rails with easy installation. Refer to following procedures to install into the rack. The steps are as follows:...
  • Page 65 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Page 65 of 70...
  • Page 66 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 WARNING: Do not pull the handles of server system arbitrarily. Otherwise, it will be pulled out the system from the rack, causing system power failure, downtime and other failures.
  • Page 67 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Overall parameters of system are as follows: System System model actiNAS BB212-3 System node Support one hot-swappable controller module Support two CPU Hard disk Support 12 3.5-inch or 2.5-inch SATA or SAS hard drives...
  • Page 68 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Intel® RSTe Support software RAID 0, 1,5&10(for windows PCHRAID only) Graphics card Aspeed AST2400 Support for Intelligent Platform Management Interface v2.0 IPMI IPMI 2.0 with virtual media over LAN and KVM over LAN...
  • Page 69 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Fan voltage 12(9~13.2)V Fan current 1.5A(1.65 Max) Fan speed Up to 6800+/- 10% RPM Fan airflow 2.709m³/min（95.63CFM） Fan pressure 288.22Pa operating system...
  • Page 70 User Guide barebone actiNAS BB212-3 used in actiNAS WIN 212 / actiNAS LX 212 / actiNAS SV 212 Notes: Page 70 of 70...

Table of Contents