Subscribe to Our Youtube Channel
Related Manuals for Actidata actiTape LTO-3
Summary of Contents for Actidata actiTape LTO-3
-
Page 1: Quick Start Guide
LTO-3 and LTO-4 internal SCSI and SAS Quick Start Guide actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 1 of 11... - Page 2 For Windows systems, download the latest drivers from www.actidata.com. For other operating systems, patch to the latest version of the operating system, following the instructions in the patch documentation. actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 2 of 11...
-
Page 3: Backup Software
Check the drive’s SCSI ID Your actidata LTO HH tape drive is shipped with a default SCSI ID of 0. Each device on the SCSI bus must have an unique SCSI ID number. The drive can be assigned any unused ID between 0 and 15. -
Page 4: Connecting The Scsi Tape Drive
Check your server or HBA documentation to ensure that the SCSI bus and cabling are the correct specification for your tape drive: an Ultra320 bus for actidata LTO-4 and LTO-3 drives. We recommend that you attach the SCSI ribbon cable directly to the SCSI host bus adapter. - Page 5 For other operating systems, patch to the latest version of the operating system, following the instructions in the patch documentation. 8. Upgrade backup software Always upgrade your software application to ensure it works correctly with the actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 5 of 11...
- Page 6 3. Use the latest version of your backup application. Native backup applications, such as Windows backup, may limit performance. actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 6 of 11...
- Page 7 AES industry-standard encryption and protecting the data from unauthorized access and use. Encryption is supported only on actidata LTO-4 1.6 TB media; media encrypted on a actidata LTO-4 drive can only be read on a compatible Ultrium tape drive that supports hardware encryption.
- Page 8 • Do not exceed normal cartridge life (260 full volume backup or restore operations). For detailed information on media care and best practice and to order online, refer to www.actidata.com. actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 8 of 11...
- Page 9 If flashing at a 0.5 Hz rate, the drive detected an at 0.5 Hz error and is performing a microcode recovery. It will reset automatically. actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 9 of 11...
- Page 10 Flashing Maximum operating temperature exceeded4 On2/Off Diagnostics in progress Service Mode Diagnostics Media failure Flashing Flashing Incorrect media inserted in drive Flashing Flashing Flashing actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 10 of 11...
-
Page 11: Other Sources Of Information
If you need technical support or have any problem with your LTO-3 HH or LTO-4 HH tape storage solution, phone, fax and addresses can be found under www.actidata.com. actiTape LTO-3 and LTO-4 internal SCSI and SAS – Quick Start Guide Page 11 of 11...
Need help?
Do you have a question about the actiTape LTO-3 and is the answer not in the manual?
Questions and answers