Maximum MS20300 Instruction Manual page 11

20
model no. 055-9036 | contact us 1-800-689-9928 model no. 055-9036-2 | contact us 1-888-670-6682
PACKAGE CONTENTS
No. Description
1 Mitre saw assembly
2 Mitre lock knob
3 Left and right extension rail
4 Workpiece clamp
5 Dust bag
Wrench
6
(in wrench storage)
Qty. Illustration
1
1
2
1
1
1
TOOLS NEEDED FOR ASSEMBLY
Screwdriver
Triangle square
Flower wrench
T20, T25
UNPACKING
This product requires assembly.
• Carefully lift saw from the carton by the carrying handle located at the top of the saw
body, and place it on a level work surface.
CAUTION:
This tool is heavy. To avoid back injury, lift with your legs, not your back, and
get help when needed.
• This saw has been shipped with the mitre table 60° right, saw head 0° and the saw
head secured in the down position.
• To release the saw head, push down the switch handle and pull out the head lock pin.
• Raise the saw head by the handle. Hand pressure should remain on the switch handle
to prevent sudden rise upon release of the head lock pin.
• Inspect the tool carefully to make sure that no breakage or damage occurred during
shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily
operated the tool.
• The saw is factory set for accurate cutting. After assembling it, check for accuracy. If
shipping has influenced the settings, refer to specific procedures explained in this
Operator's Manual.
• If any parts are damaged or missing, please call 1-888-670-6682 for assistance.
WARNING!
The use of attachments or accessories not listed in this manual might be
hazardous and could cause serious personal injury.
Star-head screwdriver
Framing square
21