Using The Device - Atlantic 2012 Installation And Operating Manual

Your device gives you the capability of using several functions:
- The 2h Boost function, which enables you quickly to raise your room's temperature. Your device
will operate at maximum power for 2 hours.
- The 24h Auto heating function
24 hours. Your device will operate at maximum power for 2 hours every day of the week at the
same time.
- The 24h Auto Drying function
of the week at the same time. This is ideally used during mid-season; the device is set for moderate
heat.
- The Locking function enables you to set the heating mode you have selected (e.g.: ON mode, tem-
perature set with the wheel on
instance by children, etc.).
Control box
Central programming control (see programmer instructions)
Centralised programming (via the Pilot Wire) enables you to make savings by programming tempera-
ture reductions when you wish, depending on the bathroom's period of use.
Switching on and finding the right heating temperature
The device is designed to provide the heat and comfort you require in your bathroom.
To switch on your device, position the mode selection wheel A to ON.
To set the device to standby mode, set the mode selection wheel A to OFF.
Position the temperature setting wheel D to
perature is less than that displayed.
Wait at least 6 hours for the temperature to stabilise.
If you are dissatisfied with the room's temperature, set the temperature setting wheel D to
How to raise the room's temperature quickly : use of the 2h Boost function.
To activate the 2h Boost function, set the mode selection wheel A to ON; then hold down wheel A
for approx. 1 second. If you press the wheel for too long, you risk locking the settings (see page 18).
Light B comes on. The heating light C is lit.
Your device operates at maximum power for 2 hours and then returns to normal operation (heating
the room to the temperature you have chosen).
To switch off the 2h Boost function (before 2 hours have expired), hold down wheel A again for approx.
1 second.
Light B goes out.
Your device resumes normal operation.
U
SING THE DEVICE
, which enables you to repeat the 2h Boost function every
, which enables you to heat and dry your towels every day
). It is used to prevent inadvertent manipulation of the device (for
. The heating light C lights up if the ambient tem-
16
A
Mode selection and control locking
wheel.
B
2h Boost, 24h Auto heating, 24h Auto
Drying and locking function operating
light.
C
Heating light
D
Temperature setting wheel
.