Installing the Rear Backplane
1. Confirm that the power cords are still disconnected from the power supplies.
2. Slide the rear tray out of the back of the chassis.
1
2
Figure 4-23 Installing the Rear Backplane
3. Place the rear backplane in the chassis and secure it with the three vertical
screws along the top of the backplane.
4. Secure the backplane with nine horizontal screws through the backplane.
5. Plug the power cords into the rear of the power supply, replace the chassis
cover and power up the system.
Figure 4-24. Installing the Screws Securing the Rear Backplane
Chapter 4: Chassis Setup and Maintenance
1
3
1
5
4-19
1
4