Supermicro SC847 JBOD User Manual page 52

SC847 JBOD Chassis Manual
Installing the Front Backplane
1. Confirm that the power cords are still disconnected from the power supplies.
2. Place the front backplane in the chassis.
1
2
Figure 4-21. Installing the Front Backplane
3. Install the two side screws to secure the front backplane to the chassis.
4. Install the four horizontal screws along the top of the front backplane.
5. Install the five horizontal screws along the bottom of the front backplane.
1
4
1
3
Figure 4-22. Installing the Screws Securing the Front Backplane
6. Plug the power cords into the rear of the power supply, replace the chassis
cover and power up the system.
4-18