Advertisement
I Connecting the universal cable assembly
To connect the universal cable assembly and the probe header, connect the two 34-pin connectors of
the universal cable assembly and the two 34-pin connectors on the probe header.
The connectors on the universal cable assembly, and the mounting section of the connectors on the
probe header are marked "A" and "B" to distinguish the connections.
Correctly connect connector A of the universal cable assembly to connector A on the probe header,
and connector B of the universal cable assembly to connector B on the probe header.
Connection to the emulator probe connector
Connect connector A of the universal
cable assembly to connector A on
the probe header and connector B
of the universal cable assembly to
connector B on the probe header.
Figure 3-3 Connecting the universal cable assembly and the probe header
WARNING
Electric shock
To prevent an electric shock when connecting the universal cable assembly and the
probe header, turn off the product and any connected devices and unplug the power
cable from the outlet before making the connections.
Universal cable assembly
(MB2144-210A)
Probe header
(MB2144-222-01)
5
Advertisement
