Panel Explanation; Vigor2866Ac / Vigor2866 Ax - Draytek Vigor2866 Series Quick Start Manual

2 . P a n e l E
2 . P a n e l E
2 . 1 V i g o r 2 8
2 . 1 V i g o r 2 8
No. LED
ACT
WAN2
QoS
USB
DSL
(1)
WCF
2.4G/5G
DMZ
x p l a n a t i o n
x p l a n a t i o n
6 6 a c / V i g o r 2
6 6 a c / V i g o r 2
Status
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
8 6 6 a x
8 6 6 a x
Explanation
The router is powered off.
The router is powered on and running normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The router is ready to access Internet through DSL
link.
Slowly: The DSL connection is ready.
Quickly: The connection is training.
The Web Content Filter is active. (It is enabled
from Firewall >> General Setup).
WCF is disabled.
2.4G/5G: Wireless access point with bandwidth of
2.4GHz/5GHz is ready.
WLAN: Wireless access point is ready.
Wireless function is disabled.
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will
return to normal condition after two minutes. (You
need to setup WPS within 2 minutes.)
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
2