Important Warnings And Safety Instructions - Pentair CLEAN AND CLEAR RP Installation And User Manual

IMPORTANT WARNINGS AND SAFETY INSTRUCTIONS

IMPORTANT NOTICE:
This guide provides installation and operation instructions for the this filter. Consult Pentair Water Pool and Spa, Inc. with any
questions regarding this equipment.
Attention Installer: This guide contains important information about the installation, operation and safe usage of this product. This
information should be given to the owner and/or operator of this equipment after installation.
Attention User: This manual contains important information that will help you in operating and maintaining this filter. Please retain it
for future reference.
This is the safety alert symbol. When you see this symbol on your system or in this manual, look for one of the
following signal words and be alert to the potential for personal injury.
Warns about hazards that can cause death, serious personal injury, or major property damage if ignored.
Warns about hazards that may cause death, serious personal injury, or major property damage if ignored.
Warns about hazards that may or can cause minor personal injury or property damage
if ignored.
NOTE
Indicates special instructions not related to hazards.
Carefully read and follow all safety instructions in this manual and on equipment. Keep safety labels in good condition; replace if missing
or damaged.
Consumer Information and Safety
This filter is designed and manufactured to provide many years of safe and reliable service when installed, operated and maintained
according to the information in this manual and the installation codes referred to in later sections. Throughout the manual, safety warnings
and cautions are identified by the "
Before installing this product, read and follow all warning notices and instructions which are included. Failure to
follow safety warnings and instructions can result in severe injury, death, or property damage. Call (800) 831-7133
for additional free copies of these instructions or replacement safety labels.
Do not operate the filter until you have read and understand clearly all the operating instructions
and warning messages for all equipment that is a part of the pool circulating system. The following instructions are
intended as a guide for initially operating the filter in a general pool installation. Failure to follow all operating instructions and warning
messages can result in property damage or severe personal injury or death.
Due to the potential risk that can be involved it is recommended that the pressure test be kept to the minimum time
required by the local code. Do not allow people to work around the system when the circulation system is under
pressure test. Post appropriate warning signs and establish a barrier around the pressurized equipment. If the
equipment is located in an equipment room, lock the door and post a warning sign.
Never attempt to adjust any closures or lids or attempt to remove or tighten bolts when the system is pressurized.
These actions can cause the filter to separate and could cause severe personal injury or death if they were to
strike a person.
This filter must be installed by a qualified pool serviceman in accordance with all applicable local codes and
ordinances. Improper installation could result in death or serious injury to pool users, installers, or others and may
also cause damage to property.
Always disconnect power to the pool circulating system at the circuit breaker before servicing the filter. Ensure that
the disconnected circuit is locked out or properly tagged so that it cannot be switched on while you are working on
the filter. Failure to do so could result in serious injury or death to serviceman, pool users or others due to electric
shock.
DO NOT permit children to use this product.
" symbol. Be sure to read and comply with all of the warnings and cautions.
CLEAN AND CLEAR RP Cartridge Filter Installation and User' s Guide
®
ii