Installation Of Indoor Unit - Gree R410A Manual

Photovoltaic Direct-driven VRF
for North America
The outdoor unit will not be embedded by the snow and not affected by garbage and oil smog;
◆
The installation of outdoor unit shall adopt rubber damping pad or spring damper to reduce noise and vibration;
◆
◆
installation site;
The installation shall be done by professional technicians.
◆
3.5 Fixing and damping of unit
caused.
between the unit and foundation.
3.6 Outline dimension and position of installation hole
angel of ropes must be smaller than 40º during hanging and moving.
Model
GMV-HY36WLT/A-T(U)
GMV-HY48WLT/A-T(U)
3.7 Installation space requirement
If all sides of the ODU (including the top) are surrounded by walls, process according to the following requirements for installation
space:
Wall
≥200mm
（8inch）
Wall

4 Installation of indoor Unit

4.1 Installation of quiet design duct type indoor unit
40
A
900(35-3/8) 340(13-3/8)
≥350mm
（13-3/4inch）
≥200mm
（8inch）
≥2000mm
（78-3/4inch）
B C D
1345
572(22-1/2)
(53)
≥200mm
（8inch）
≥350mm
（13-3/4inch）
Wall
Unit:mm(inch)
E
378
(15)
Wall
≥2000mm
（78-3/4inch）
Shockproof
material