Gree R410A Manual page 74

Photovoltaic Direct-driven VRF
for North America
1. Remove
wiring cover of
compressor
2. Disconnect
compressor and
connected pipeline
3. Loose nuts
compressor
4. Remove the
chassis from
compressor
5. Fix the new
compressor at the
chassis
6. Connect suction
pipe and discharge
pipe of copressor
and pipeline of
system again
72
screwdriver
● Then pull out the power cord
Note: When removing the power cord, make marks
for different color power cords and corresponding
wiring terminals for wrong terminal.
● Weld suction pipe and discharge pipe of
compressor
● then pull out the connection pipe from the
compressor
burn out other parts.
Twist off three nuts
for compressor with
wrench
Twist off the nuts for compressor with wrench
● Take out the compressor and replace it
Note: When replacing the compressor, do not
damage nearby pipelines and other parts
bottom of compressor
● Weld the connection pipe of compressor,
connect the pipeline and compressor
burn out other parts